Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #7

Edit by Jake Devincenzi

Edit approved by Jake Devincenzi

Before
After
Unchanged

Step Lines

[* black] Use a flathead screwdriver to remove the screw from the device.
[* icon_noteblack] The size of the driver dependswill depend on the size of the screw, but use the largest size that will fit in your cut.
[* icon_noteblack] The size of the driver dependswill depend on the size of the screw, but use the largest size that will fit in your cut.
[* icon_note] If you cannot fit a screwdriver into the cut, use the rotary tool to make the cut larger. Make only small cuts; if you cut off too much of the screw, a screwdriver will not catch and you will not be able to twist the screw.