Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #5

Edit by Jay Miley

Edit approved by Jay Miley

Before
After
Unchanged

Step Lines

[* icon_note] If you were unable to remove the screw with screwdrivers, pliers, and a rubber band, or super glue, then a rotary tool should do the trick.
[* black] Attach a thin metalcutting disk bit to your rotary tool andtool. Before you cut anything, make sure itthe disk is on tightlysecured well.
[* icon_note] If you were unable to remove the screw with screwdrivers, pliers, and a rubber band, or super glue, then a rotary tool should do the trick.
[* black] Attach a thin metalcutting disk bit to your rotary tool andtool. Before you cut anything, make sure itthe disk is on tightlysecured well.
[* icon_caution] Make sure you wear protective goggles anytime you use a rotary tool to prevent injuries from flying debris and sparks.