Skip to main content

Changes to Step #3

Edit by Adriana Zwink

Edit approved by Adriana Zwink

Before
After
Unchanged

Step Lines

-[* black] Insert a second opening pick and slide it to the top left corner. Slide the tip of the opening pick from the bottom left corner along the side of the phone to cut the adhesive.
+[* black] Insert a second opening pick and slide it from the bottom to the top left corner to cut the adhesive.
[* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.
[* black] Leave the opening picks in place to prevent the adhesive from resealing.

Image 2

Old Version

New Version