Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #9

Edit by William Bennett

Edit approved by William Bennett

Before
After
Unchanged

Step Lines

[* black] Hold the spool above the plastic rodaxle so that the rodaxle is concentric to the hole. Pinch the middle of the spring and slide the creased end through the gap in the middle of the axle. Push the whole mechanism down into the shell of the tape measure until it is flat against the plastic.
[* black] Hold the spool above the plastic rodaxle so that the rodaxle is concentric to the hole. Pinch the middle of the spring and slide the creased end through the gap in the middle of the axle. Push the whole mechanism down into the shell of the tape measure until it is flat against the plastic.

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added