Skip to main content

Changes to Step #13

Edit by Josh Wright

Edit approved by Josh Wright

Deleted
Added
Unchanged

Step Lines

[* black] The Memory slots are now as exposed as possible So It is time to install the New Memory Module's
[* black] If you have not already done so Remove the Memory Module By releasing the locks that hold it in place ( Boxed in Green) Push them apart in the direction shown.
[* black] Lift out the Memory Module
[* black] Insert the new module (If only upgrading with one module it is important to use the bottom Slot)
[* black] Push the Memory down until the Locks lock It into Position
[* black] The new Memory Is now installed :)
[* black] Thanks for using this guide :P Please feel free to edit if you think something could be done better or comment if possible