Skip to main content

Changes to Step #12

Edit by Josh Wright

Edit approved by Josh Wright

Deleted
Added
Unchanged

Step Lines

[* black] Apply A little amount of Thermal Compound to the Copper part of the cooling unit in the same positioning as the lastlast. A miniscule amount, just enough to create a tiny layer.
[* black] Screw in the Cooling unit,unit/Heat sink. screw the 2 bottom screws first then the top as the top screw requires to be pushed down onto the board before it is able to be screwed in
[* black] Apply A little amount of Thermal Compound to the Copper part of the cooling unit in the same positioning as the lastlast. A miniscule amount, just enough to create a tiny layer.
[* black] Screw in the Cooling unit,unit/Heat sink. screw the 2 bottom screws first then the top as the top screw requires to be pushed down onto the board before it is able to be screwed in
[* black] There you have it :) Your new Processor is installed

Image 1

No previous image

Added