Skip to main content

Changes to Step #4

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

[* black] Wedge a plastic opening tool between the AirPort board (side nearest the I/O ports) and the I/O board.
-[* black] Gently pry the AirPort board upwards off its recess on the I/O board.
+[* black] Gently pry the AirPort board upwards, but do ***not*** remove it.
[* icon_caution] Only lift the AirPort board as much as is necessary to get a grip on it. Lifting it too high above the I/O board may damage the board or the socket.