Skip to main content

Changes to Step #4

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Using a plastic opening tool, gently lift the screw side of the AirPort board up from the I/O board.
-[* icon_note] Only lift the board high enough to grab the sides.
+[* black] Wedge a plastic opening tool between the AirPort board (side nearest the I/O ports) and the I/O board.
+[* black] Gently pry the AirPort board upwards off its recess on the I/O board.
+[* black] Only lift the AirPort board as much as is necessary to get a grip on it. Lifting it too high above the I/O board may damage the board or the socket.