Skip to main content

Changes to Step #2

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Use the flat end of a spudger to pry up and disconnect the three antenna cable connectors from the AirPort board.
-[* icon_reminder] For reassembly, note that the three cables are coded with black sleeves of different lengths.
- [* black] Connect the long-sleeved cable to the center socket.
- [* black] The short-sleeved cable connects next to the screw.
- [* black] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.
+[* black] Use the flat end of a spudger to pry and disconnect the three antenna cable connectors from the AirPort board.
+[* icon_reminder] The three cables are coded with black sleeves of different lengths. During reassembly:
+ [* red] Connect the long-sleeved cable to the center socket.
+ [* orange] The short-sleeved cable connects next to the screw.
+ [* yellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.