Skip to main content

Changes to Step #2

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart


Step Lines

-[* black] Insert wisdom here.
+[* black] Use the flat end of a spudger to pry up and disconnect the three antenna cable connectors from the AirPort board.
+[* icon_reminder] For reassembly, note that the three cables are coded with black sleeves of different lengths.
+ [* black] Connect the long-sleeved cable to the center socket.
+ [* black] The short-sleeved cable connects next to the screw.
+ [* black] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.