Skip to main content

Changes to Step #8

Edit by Tiny Machines 3D

Edit approved by Tiny Machines 3D

Before
After
Unchanged

Step Lines

[title] Install 1f.
-[* black] Insert wisdom here.
+[* orange] Double check that the colors match from the motherboard side to the probe side and plug the motherboard side into the probe side.
+[* red] Provided zip ties can be used to attach the new harness to the original in the locations shown.
+ [* yellow] Be sure to leave a little slack in the probe harness so it is not pulled on when the X axis moves back and forth.

Image 2

Old Version

New Version