Skip to main content

Changes to Step #2

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

-[* black] Remove the following screws securing the battery board to the logic board:
- [* red] Two 2.8 mm T6 screws
- [* orange] One 7 mm T7 shouldered screw
+[* black] Remove the following screws securing the battery connector board to the logic board:
+ [* red] Two 2.8 mm T6 Torx screws
+ [* orange] One 7.0 mm T7 Torx shouldered screw