Skip to main content

Changes to Step #3

Edit by Marty Rippens

Edit approved by Marty Rippens

Before
After
Unchanged

Step Lines

[* red] Use the opening tool to disconnect the press-fit connection on the top left of the motherboard, similar to the previous step.
-[* orange] Use either your finger nail or tweezers to pull the orange boxed connector out. Unlike the other connections this one is pulled down not up from the device.
+[* orange] Use either your fingernail or tweezers to pull the orange boxed connector out. Unlike the other connections, this one is pulled down and not up from the device.