Skip to main content

Changes to Step #3

Edit by Austin Blakely

Edit approved by Austin Blakely

Before
After
Unchanged

Step Lines

-[* black] Locate the two connectors on the top left of the device page.
-[* red] Use the opening tool for the red boxed connection similar to the previous step.
+[* red] Use the opening tool to disconnect the press-fit connection on the top left of the motherboard, similar to the previous step.
[* orange] Use either your finger nail or tweezers to pull the orange boxed connector out. Unlike the other connections this one is pulled down not up from the device.