Skip to main content

Changes to Step #1

Edit by Rachel Dykes

Edit approved by Rachel Dykes

Before
After
Unchanged

Step Lines

[* icon_note] Flip the tablet 180 degrees for this step so the motherboard is easier to access.
-[* yellow] Remove the yellow components from the motherboard by gently lifting the connection hubs.
-[* orange] Remove the four orange components in this area of the motherboard by gently lifting the connection hubs.
-[* red] Remove each ribbon cable marked in red by lifting the locking mechanism on the casing holding the cable. Then gently pull the ribbon cable from the casing with your fingers or tweezers.
+[* yellow] Remove these components from the motherboard by gently lifting the connection hubs.
+[* orange] Remove the four components in this area of the motherboard by gently lifting the connection hubs.
+[* red] Remove each ribbon cable by lifting the locking mechanism on the casing holding the cable. Then gently pull the ribbon cable from the casing with your fingers or tweezers.
[* icon_caution] Carefully remove ribbon cables. Ribbon cables are easy to damage and may not always appear damaged. Any damage could potentially cause your device not to work.