Skip to main content

Changes to Step #1

Edit by Rachel Dykes

Edit approved by Rachel Dykes

Before
After
Unchanged

Step Lines

[* icon_note] Flip the tablet 180 degrees for this step so the motherboard is easier to access.
[* yellow] Remove the yellow components by gently lifting the connection hubs.
-[* orange] Remove the orange components by gently lifting the connection hubs. There are four parts connected to the motherboard in this area.
-[* red] Remove the ribbon cable by lifting the bronze locking mechanism on the gray casing holding the cable. Then gently pull the ribbon cable with tweezers.
-[* icon_caution] Remove the ribbon cable carefully.
+[* orange] Remove the four orange components in this area by gently lifting the connection hubs.
+[* red] Remove the ribbon cable by lifting the bronze locking mechanism on the gray casing holding the cable. Then gently pull the ribbon cable from the casing with tweezers.
+ [* icon_caution] Remove the ribbon cable carefully. Ribbon cables are easy to damage and may not always appear damaged. The damage could potentially cause your device not to work.