Skip to main content

Changes to Step #1

Edit by Sarah Westberg

Edit approved by Sarah Westberg

Before
After
Unchanged

Step Lines

[* icon_note] Flip the tablet 180 degrees for this step so the motherboard is easier to access.
-[* yellow] Remove these components from the motherboard by gently lifting the connection hubs.
-[* orange] Remove the four components in this area of the motherboard by gently lifting the connection hubs.
+[* red] Disconnect the cable connectors from the motherboard by gently lifting the connection hubs.
[* red] Remove each ribbon cable by lifting the locking mechanism on the casing holding the cable.
[* red] Gently pull the ribbon cable from the casing with your fingers or tweezers.
[* icon_caution] Carefully remove ribbon cables. Ribbon cables are easy to damage and may not always appear damaged. Any damage could potentially cause your device not to work.

Image 1

Old Version

New Version