Changes to Step #4
Edit by gjsmithemail —
Edit approved by gjsmithemail
- Before
- After
- Unchanged
Step Lines
[* icon_note] The speaker and chime wires are soldered to the board. |
[* black] Gently lay lid flat. Imagine it’s a sandwich you don’t want to upset |
[* red] Remove two 5/16” screws and two speaker brackets. |
[* orange] Remove four 5/16” screws from board. |
[* yellow] Remove two more 5/16” screws from board. |
[* black] Remove the board. Appreciate how easy everything’s been so far. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added