Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] Separate atOnce you have created a gap between the arrows by usingtwo halves of the bud, gently pry them apart with a plastic opening tool
[*
tool.
[*
black] WorkYou may need to work your way around the entire earbud
[* black]
earbud. Take your time and apply firm constant forcedo your best not to deform the plastic.
[* black] Carefully remove the top of the bud.

[* icon_caution] Be'''Be careful when pulling the halves apart since they are connected by aapart!''' Sometimes the battery assembly gets caught in the case. If the top half of your case doesn't come out cleanly, skip this step and disconnect the cable in step 5 before separating the two halves of the bud.
[* black] Separate atOnce you have created a gap between the arrows by usingtwo halves of the bud, gently pry them apart with a plastic opening tool
[*
tool.
[*
black] WorkYou may need to work your way around the entire earbud
[* black]
earbud. Take your time and apply firm constant forcedo your best not to deform the plastic.
[* black] Carefully remove the top of the bud.

[* icon_caution] Be'''Be careful when pulling the halves apart since they are connected by aapart!''' Sometimes the battery assembly gets caught in the case. If the top half of your case doesn't come out cleanly, skip this step and disconnect the cable in step 5 before separating the two halves of the bud.