Skip to main content

Changes to Step #1

Edit by Ron Davis

Edit approved by Ron Davis

Deleted
Added
Unchanged

Step Lines

[* redblack] Remove the SIM card tray (if present in your model).
[* black
] Insert a large pryingplastic opening tool next to the Kindle's headphone jack.
[* yellowicon_note] Make sure the arrownotch on the pryingplastic opening tool is facing the back of the Kindle.
[* black] Move the pryingplastic opening tool equallyevenly around the Kindle so that the Kindle does not bend in half.
[* black] Make sure to remove the lock key before
Kindle, separating the back and fronttwo halves.
[* black] Onceicon_caution] Be careful not to completely separate the rear cover. There are two halves have separated, leave thedelicate flex cables attachedthat connect the display assembly to the motherboard.
[* redblack] Remove the SIM card tray (if present in your model).
[* black
] Insert a large pryingplastic opening tool next to the Kindle's headphone jack.
[* yellowicon_note] Make sure the arrownotch on the pryingplastic opening tool is facing the back of the Kindle.
[* black] Move the pryingplastic opening tool equallyevenly around the Kindle so that the Kindle does not bend in half.
[* black] Make sure to remove the lock key before
Kindle, separating the back and fronttwo halves.
[* black] Onceicon_caution] Be careful not to completely separate the rear cover. There are two halves have separated, leave thedelicate flex cables attachedthat connect the display assembly to the motherboard.

Image 1

Old Version

New Version

Image 2

Old Version

New Version