Skip to main content

Changes to Step #14

Edit by baq

Pending approval

Before
After
Unchanged

Step Lines

[* black] Lets get back to the body of the camera
[* black] Lift this plastic lock to remove the hight voltage chip powering the speed light.
[* black] 3 cables connect this board with the lamp and they are soldered.
-[* black] The capacitor has 320 micro farads of capacity and operates at 330 volts. That's 17 joules of potential electric energy, quite much for a speed light.
+[* black] The capacitor has 320 micro farads of capacity and operates at 330 volts. That's 17.4 joules of potential electric energy, quite much for a speed light.