Skip to main content

Changes to Step #14

Edit by baq

Pending approval

Before
After
Unchanged

Step Lines

+[* black] Lets get back to the body of the camera
+[* black] Lift this plastic lock to remove the hight voltage chip powering the speed light.
+[* black] 3 cables connect this board with the lamp, and they are soldered.
+[* black] The capacitor has 320 micro farads of capacity and operates at 330 volts. That's 17 joules of potential electric energy, quite much for a speed light.

Image 1

No previous image

Added

Image 2

No previous image

Added