Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #8

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Before
After
Unchanged

Step Lines

[* black] Not satisfied with just removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and ''tear down''tear down even more.
[* black] Not satisfied with just removing the modules, we bust out our [product|IF145-039-4|Torx T5|new_window=true] screwdriver and an opening pick and ''tear down''tear down even more.
[* black] Starting with the top module:
[* black] The 8 MP ƒ2.0 front camera and earpiece speaker are separatelyboth removable
[* black] The 8 MP ƒ2.0 front camera and earpiece speaker are separatelyboth removable
[* black] The headphone jack as well as the proximity and ambient light sensors are soldered onto the breakout board.
[* black] The camera module carries a separately removablemodular 12 MP ƒ1.8 camera with a SONY IMX363 Exmor RS sensor. The flash LEDs are soldered onto the breakout board.
[* black] The camera module carries a separately removablemodular 12 MP ƒ1.8 camera with a SONY IMX363 Exmor RS sensor. The flash LEDs are soldered onto the breakout board.
[* black] The bottom module contains the vibration motor, and a soldered-on USB-C port and microphone.
[* black] The loudspeaker module is the loneliest of the modules clinging onto the bottom module with its two contacts.