Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Julian Sailer

Edit approved by Fabian Neidhardt

Before
After
Unchanged

Step Lines

[* icon_note] The large silver-colored molded part above the top and front is now only fastened with catches, which can, however, be quite stuck. Only use plastic tools to pry loose.
[* black] Slide the cup holder all the way down.
[* black] Start to pry off the molded part at the back seam, the catches gradually loosen with a loud crack.
[* black] It's a bit tricky to slide the cover over the steam valve knob, you need some strength to do it.
[* black] The white magnetic contact (reed contact) for the lid of the bean container is located under the bean container. Lift it up and drop it through the opening in the molding.
[* black] Lift up the cover