Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Dov Rosenberg

Edit declined by Annika Faelker

Before
After
Unchanged

Step Lines

[* icon_note] The large silver-coloredmetallic, large, molded part above the top and front of that thang is now only fastened with catches, which can, however, be quite stuck. Onlycatches! This can get kinda stuck! Only use plastic tools to pry loose.ANYTHING loose! :-)
[* black] SlideLocate the cup holder all the way down."cup holder" and slide it ALL THE WAY DOWN! :-)
[* black] Start to gently pry off the molded part at"molded part," which is located along the back seam, the catches gradually"back seam," which catches, and then gently loosen withthat thang and you should a loud crack.CRACK!
[* black] It'sIt can be just a bit tricky to slide the cover over the steam"steam valve knob,knob" and you are going to need some strength to do it.it, bro! Or sis! But we believe in you! Use that elbow grease, sis or bro! :-)
[* black] The white magnetic contact (reed contact)"white magnetic" contact, aka the "reed" contact, for the lid of the bean container"bean container," is located under the bean container. Lift itit. Lift that thang up and& drop it throughlike it's hot thru the opening in the molding.molding! :-)
[* icon_note] The large silver-coloredmetallic, large, molded part above the top and front of that thang is now only fastened with catches, which can, however, be quite stuck. Onlycatches! This can get kinda stuck! Only use plastic tools to pry loose.ANYTHING loose! :-)
[* black] SlideLocate the cup holder all the way down."cup holder" and slide it ALL THE WAY DOWN! :-)
[* black] Start to gently pry off the molded part at"molded part," which is located along the back seam, the catches gradually"back seam," which catches, and then gently loosen withthat thang and you should a loud crack.CRACK!
[* black] It'sIt can be just a bit tricky to slide the cover over the steam"steam valve knob,knob" and you are going to need some strength to do it.it, bro! Or sis! But we believe in you! Use that elbow grease, sis or bro! :-)
[* black] The white magnetic contact (reed contact)"white magnetic" contact, aka the "reed" contact, for the lid of the bean container"bean container," is located under the bean container. Lift itit. Lift that thang up and& drop it throughlike it's hot thru the opening in the molding.molding! :-)
[* black] Lift up the cover.