Changes to Step #4
Step Lines
| + | [title] Desolder the cables |
|---|---|
| + | [* green] You will see an red and an black cable soldered to the PCB. |
| + | [* black] Now get your solder iron ready to desolder the 2 cables. Heat and melt the solder, with your other hand hold the tweezer. When the solder is melting, remove the cable with your tweezer to get the cable out. |
| + | [* icon_note] It's recommended you use desoldering wick, so you can put some fresh new solder on the pads. Recommended but not required. |
| + | [* black] Now it should look like the last photo. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added