Skip to main content

Changes to Step #5

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* icon_reminder] This step shows how to reinstall the light sensor.
+[* black] Align the top edge of the plastic midframe with the phone.
+[* black] Use the point of a spudger to carefully align and push the light sensor connector onto the motherboard socket.
+ [* icon_note] This takes a bit of patience and finesse. Once you have the connector in place, you can use a finger to gently press the connector onto the socket.
+[* black] Alternatively, you can remove the light sensor from the midframe to reattach it to the motherboard first.
+ [* black] Use the point of a spudger to carefully pry the light sensor out of its recess on the midframe. The sensor is lightly adhered to the midframe.
+ [* black] Connect the sensor connector onto its motherboard socket.
+ [* black] Thread the sensor cable through the midframe and reposition the sensor in the recess. Press down with your finger to adhere the sensor back onto the midframe.