Skip to main content

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Slide the opening pick along the left and right edges of the phone to release the midframe clips.
-[* black] Lift the bottom edge of the plastic midframe up but ***do not remove the midframe***. The midframe is still tethered to the phone by the fragile light sensor cable at the top edge.
+[* black] Lift the bottom edge of the plastic midframe up but ***do not remove the midframe***. The midframe is still tethered to the phone by the fragile proximity sensor cable at the top edge.
[* icon_reminder] To reinstall the plastic midframe, align the midframe to the back cover, and [https://d3nevzfk7ii3be.cloudfront.net/igi/1coAADrQtUAu4Y3l.large|squeeze the perimeter of the phone with your fingers|new_window=true] to snap the clips back into position.