Skip to main content

Changes to Step #20

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

+[* black] Slide the lower left pick to the lower left corner to cut the adhesive on that corner.
+[* black] Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.
+[* icon_note] There are quite a few things to avoid beneath the lower bezel, so study the third image closely:
+ [* red] Antennas
+ [* orange] Home button cavity
+ [* yellow] Digitizer cable
+[* black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added