Skip to main content

Changes to Step #13

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

+[* black] Leave the opening pick in the iPad slightly past the front-facing camera.
+[* black] Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.
+[* black] Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added