Skip to main content

Changes to Step #4

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

+[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
+ [* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.
+[* black] Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added