Skip to main content

Changes to Step #9

Edit by Luke Soules

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Getting to the optical drive takes a bit more work...
[* black] First remove the screws securing the vent plate near the hingesThe rear vent is held in place by both Phillips #00 and remove it from the upper caseT7 Torx screws. We haven't seen Apple use any T7 screws lately, so this is an interesting screw choice.
[* black] First remove the screws securing the vent plate near the hingesThe rear vent is held in place by both Phillips #00 and remove it from the upper caseT7 Torx screws. We haven't seen Apple use any T7 screws lately, so this is an interesting screw choice.
[* black] The cast aluminum vent plate is painted with a satin white rubberized paint, and probably adds a good amount of rigidity to the device.

Image 1

Old Version

New Version