Skip to main content

Changes to Step #1

Edit by Keerat Grewal

Edit approved by Keerat Grewal

Before
After
Unchanged

Step Lines

-[* orange] Locate the display cable connector bracket. It is near the edge of the device and the hinge for the screen.
-[* red] Remove the two silver 2 mm screws from the display cable connector bracket using the Phillips #00 screwdriver.
+[* red] Locate the display cable connector bracket. It is near the edge of the device and the hinge for the screen.
+[* orange] Remove the two silver 2 mm screws from the display cable connector bracket using the Phillips #00 screwdriver.
[* black] Remove the bracket and unplug the display cable from the board.

Image 1

Old Version

New Version

Image 2

Old Version

New Version