Skip to main content

Changes to Step #3

Edit by Elizabeth Claypool

Edit approved by Elizabeth Claypool

Before
After
Unchanged

Step Lines

-[* black] Remove black panel that you just unscrewed.
-[* black] Place the black panel to the side, keeping the wires attached.
-[* icon_note] The panel should lift up without much force. If the panel does not budge, carefully use "insert prying tool" to dislodge the piece.
+[* black] Remove and set aside the black panel, taking care to keep the wires attached.
+[* icon_note] The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.