Skip to main content

Changes to Step #3

Edit by Gianna Nobili

Edit approved by Gianna Nobili

Before
After
Unchanged

Step Lines

-[* black] Remove black panel that you just unscrewed
-[* black] Place the black panel to the side, keeping the wires attached
-[* icon_note] The panel should lift up without much force. If the panel does not budge, carefully use "insert prying tool" to dislodge the piece
+[* black] Remove black panel that you just unscrewed.
+[* black] Place the black panel to the side, keeping the wires attached.
+[* icon_note] The panel should lift up without much force. If the panel does not budge, carefully use "insert prying tool" to dislodge the piece.