Skip to main content

Changes to Step #4

Edit by Andy Maness

Edit approved by Andy Maness

Before
After
Unchanged

Step Lines

[* red] Pull off the two pieces of black adhesive tape on the battery.
-[* icon_note] If the tape doesn't pull the battery out with it, use a the flat side of the spudger to pry the battery from the phone.
- [* black] In this case, use the spudger to separate any extra adhesive under the battery.
+[* icon_note] If the tape doesn't pull the battery out with it, use a spudger to carefully pry the battery from the phone.
+ [* black] In this case, use the spudger to also separate any extra adhesive under the battery.

Image 1

Old Version

New Version