Skip to main content

Changes to Step #2

Edit by Aidan Barbieux

Edit approved by Aidan Barbieux

Before
After
Unchanged

Step Lines

-[* red] Using a Size 0 Philips head screwdriver, unscrew the screw on the exposed wheel.
-[* black] Once the screw is gone, remove the wheel from Vector's body.
+[* red] Using a Size 0 Philips head screwdriver, unscrew the two screws on the exposed wheels.
+[* black] Once the screws are gone, remove the wheels from Vector's body.
[* black] Repeat this on the other side.

Image 1

Old Version

New Version