Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #9

Edit by JaosnT

Pending approval

Before
After
Unchanged

Step Lines

[* black] These areAfter the LCD Ribbon Cables.mainboard has been removed
[* black] You will remove these by gently pulling up on either sidehave a look at some of the tiny brown connectors attching themour main components. The LCD and Prism connectoed to the Lens as well as some of the cooling Channels.
[* black] You can opt to remove this little
board from a fan shroud but i chose to leave it attached
[* black] I removed it to show you what it looks like anyway.
[* black] These areAfter the LCD Ribbon Cables.mainboard has been removed
[* black] You will remove these by gently pulling up on either sidehave a look at some of the tiny brown connectors attching themour main components. The LCD and Prism connectoed to the Lens as well as some of the cooling Channels.
[* black] You can opt to remove this little
board from a fan shroud but i chose to leave it attached
[* black] I removed it to show you what it looks like anyway.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added