Skip to main content

Changes to Step #6

Edit by Arthur Shi

Edit approved by Arthur Shi

Deleted
Added
Unchanged

Step Lines

[* black] Despite their similar hardware, iPads continue to lag way, way behind iPhones in their construction—this home button being a perfect example. On iPhones this is [guide|100950|an easy, elegant swap|stepid=189484|new_window=true], but here it's still a mess of glue, [guide|30628|even after|stepid=71873|new_window=true] [guide|48891|all this time|stepid=107324|new_window=true].
[* black] Elsewhere on this display, we blast the shields off and smoke out the chips underneath:
[* red] Parade DP815 (likely a timing controller)
[* orange] Texas Instruments [https://datasheet.octopart.com/TPS65195YFFR-Texas-Instruments-datasheet-15994572.pdf|TPS65195|new_window=true] level shifters
[* yellow] Texas Instruments TPS65144 LCD bias
[* green] 24879 B834QL
[* black] NextNext, we turn to the glued-in battery, rated for 19.32 Wh at 3.82 V and 5142 mAh.
[* black] NextNext, we turn to the glued-in battery, rated for 19.32 Wh at 3.82 V and 5142 mAh.
[* icon_note] That's the same as the [guide|48891|last Mini's|new_window=true] 19.32 Wh, and a lot less than the [guide|105416|standard iPad's|stepid=198954|new_window=true] 32.9 Wh. It comes in a little over the [guide|112412|Galaxy Note9's|stepid=215053|new_window=true] 15.4 Wh.