Skip to main content

Changes to Step #6

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Where before the homeHome button bracket was hot-glued in place, now it's just ... glued. Prettier to look at, but stillbracket—still hot-melt glued and a whole lotta no fun to replace whenremove, but you need to changegotta do it if you want Touch ID after a screen and want to keep Touch ID.repair. But at least the glue is ''black'' now, so it matches, which is just as important?
[* black] Where before the homeHome button bracket was hot-glued in place, now it's just ... glued. Prettier to look at, but stillbracket—still hot-melt glued and a whole lotta no fun to replace whenremove, but you need to changegotta do it if you want Touch ID after a screen and want to keep Touch ID.repair. But at least the glue is ''black'' now, so it matches, which is just as important?
[* black] Display and touch controller chips
[* black] This Mini's packing a 19.32 Wh battery running at 3.82 V and 5142 mAh.
[* icon_note] That's slightly larger than the [guide|48891|last Mini's|new_window=true] 19.1 Wh, and a lot less than the [guide|105416|standard iPad's|stepid=198954|new_window=true] 32.9 Wh.