Skip to main content

Changes to Step #12

Edit by Taylor Dixon

Edit approved by Taylor Dixon

Deleted
Added
Unchanged

Step Lines

[* black] Reaching back into the almost empty case, we fish out the slightly modified [guide|75578|(compared to last time)|stepid=152779|new_window=true] sync button—now with two solder points for the ends of the wireless charging coil.
[* black] Ah yes, the thing we came all this way for—the new wireless charging coil, and a thermal pad to keep it cool under pressure.
[* black] Despite our best efforts, neither one comes out intact.
[* icon_note] This updated case seems designed for increased ''durability'', ifbut not ''repairability''. That beefier hinge and water-repellent coating on the board probably makes for fewer failures—hopefully ''way'' fewer, because the rest of this thing is still a hot mess to service.
[* icon_note] This updated case seems designed for increased ''durability'', ifbut not ''repairability''. That beefier hinge and water-repellent coating on the board probably makes for fewer failures—hopefully ''way'' fewer, because the rest of this thing is still a hot mess to service.