Skip to main content

Changes to Step #12

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Deleted
Added
Unchanged

Step Lines

[* black] Reaching back into the almost empty case, we fish out the sync button, shaped slightly [guide|75578|differently from the last version|stepid=152779|new_window=true], and now with two solder points where two ends of the charging coil were connected.
[* black] Flipping it over we find
two extra contacts underneathunderneath, probably having to do with the charging coil.
[* black] Last but not least, the new wireless charging coil! As well as its heat padcoil, and a thermal pad to keep it cool under pressure.
[* black] Reaching back into the almost empty case, we fish out the sync button, shaped slightly [guide|75578|differently from the last version|stepid=152779|new_window=true], and now with two solder points where two ends of the charging coil were connected.
[* black] Flipping it over we find
two extra contacts underneathunderneath, probably having to do with the charging coil.
[* black] Last but not least, the new wireless charging coil! As well as its heat padcoil, and a thermal pad to keep it cool under pressure.