Changes to Step #25
Edit by Robert Shuler —
Edit approved by Robert Shuler
- Before
- After
- Unchanged
Step Lines
| [* black] The Small EMI/Heat Sink Shield is not soldered on and can be easily removed with a dental pick tool |
| [* black] Use the Dental Pick Tool to pry up the sides of the EMI/Heat Sink Shield |
| [* black] Once the EMI/Heat Shield has been remove loosen, it can be pulled off |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added