Changes to Step #14
Edit by Robert Shuler —
Edit approved by Robert Shuler
- Before
- After
- Unchanged
Step Lines
| [* black] With the metal shield tape removed and the foam tape scraped off, the Microphone and PIR Sensor Flex PCB can bed reviewed |
| [* blue] [http://vespermems.com/products/vm1010|Vesper VM1010 Wake-On-Sound MEMS Microphone] |
| [* light_blue] TDK ICS-41350 Microphone |
| [* red] Light Detector |
| [* orange] Multi-Color LED |
| [* green] [http://www.excelitas.com/Downloads/PYD1588Datasheet.pdf|PYD1548 Excelites Tech Low Power Motion PIR Sensors] |
| [* black] The Microphone and PIR Sensor Flex PCB has foam tape on both sides, and a rubber cavity that surrounds the Microphones. The foam tape, and rubber cavity can be removed to allow a close up view of the Microphones |
Image 1
No previous image
Added
Image 2
No previous image
Added