Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #12

Edit by Robert Shuler

Edit approved by Robert Shuler

Before
After
Unchanged

Step Lines

[* black] With the Large EMI / Heat Sink Shield removed, we can now remove the Flex PCB that contains the Microphones, Light Detector, Multi-Color LED and PIR Sensor
[* black] With the Large EMI / Heat Sink Shield removed, we can now remove the Flex PCB that contains the Microphones, Light Detector, Multi-Color LED and PIR Sensor
[* black] Use a pair of Long Needle Nose Pliers to pull the Metal Shield Tape from the backside of the Camera Assemble Body.
[* black] From the frontside of the Camera Assembly Body, pull the Metal Shielding Tape through the hole to the backside of the Camera Assembly Body
[* black] Use the Spudger Tool to gently pry out the Flex PCB. The Flex PCB is held in place by double stick foam tape
[* black] The Speaker can also be removed after the Metal Shield Tape has been removed by pulling the speaker cable through the hole between the backside and frontside of the Camera Assembly Body that was occupied by the Metal Shield Tape