Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #12

Edit by Robert Shuler

Edit approved by Robert Shuler

Before
After
Unchanged

Step Lines

[* black] With the Large Heat Shield removed, we can now remove the Microphone, and PIR Sensor Flex PCB
[* black] Use a pair of long needle nose pliers to pull the metal shield tape from the backside of the Camera Assemble Body.
[* black] From the front side of the Camera Assembly Body, pull the metal shielding tape through the hole to the backside
[* black] Use the Spudger Tool to gently pry out the Microphone and PIR Sensor Flex PCB. The Flex PCB is held in place with double stick foam tape
[* black] The Speaker can also be removed after the metal shield tape has been removed by pulling the speaker cable through the hole between the backside and front side of the Camera Assembly Body occupied by the metal shield tape

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added