Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Robert Shuler

Edit approved by Robert Shuler

Before
After
Unchanged

Step Lines

[* black] With the Camera Face Plate removed, use the Spudger Tool to pry the Camera Assembly away from the Camera Body
[* black] Once the Camera Assembly comes loose from the Camera Body, use the Spudger Tool to pry up onagainst the two plastic tabs on the bottom of the Camera Assembly that hold the Camera Assembly to the Camera Body PCB (Main PCB)
[* black] Once the Camera Assembly comes loose from the Camera Body, use the Spudger Tool to pry up onagainst the two plastic tabs on the bottom of the Camera Assembly that hold the Camera Assembly to the Camera Body PCB (Main PCB)
[* black] Pull the Camera Assembly away from the Assembly Body
[* blue] The Camera Assembly is held in place by Zero Insertion Force Connectors to the Main PCB in the Camera Body