Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Robert Shuler

Edit approved by Robert Shuler

Before
After
Unchanged

Step Lines

[* black] With the camera face plateCamera Face Plate removed, use the Spudger Tool to pry the camera assemblyCamera Assembly away from the camera bodyCamera Body
[* black] Once the camera assemblyCamera Assembly comes loose,loose from the Camera Body, use the Spudger Tool to pry up on the two plastic tabs on the bottom of the camera assemblyCamera Assembly that hold the camera assemblyCamera Assembly to the camera bodyCamera Body PCB (Main PCB)
[* black] Pull the camera assemblyCamera Assembly away from the assembly bodyAssembly Body
[* blue] The camera assemblyCamera Assembly is held in place by zero insertion force connectorsZero Insertion Force Connectors to the main pcbMain PCB in the camera bodyCamera Body
[* black] With the camera face plateCamera Face Plate removed, use the Spudger Tool to pry the camera assemblyCamera Assembly away from the camera bodyCamera Body
[* black] Once the camera assemblyCamera Assembly comes loose,loose from the Camera Body, use the Spudger Tool to pry up on the two plastic tabs on the bottom of the camera assemblyCamera Assembly that hold the camera assemblyCamera Assembly to the camera bodyCamera Body PCB (Main PCB)
[* black] Pull the camera assemblyCamera Assembly away from the assembly bodyAssembly Body
[* blue] The camera assemblyCamera Assembly is held in place by zero insertion force connectorsZero Insertion Force Connectors to the main pcbMain PCB in the camera bodyCamera Body