Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Robert Shuler

Edit approved by Robert Shuler

Before
After
Unchanged

Step Lines

[* black] TheWith the camera assembly PH00 screwsface plate removed, use the Spudger Tool to pry the camera face plateassembly away from the camera body
[* black] Once the camera face plateassembly comes loose, pry up on the two plastic tabs on the bottom of the camera face plateassembly that hold the camera face plateassembly to the camera body PCB
[* black] Pull the camera assembly away from the assembly body
[* blue] The camera assembly is held in place by zero insertion force connectors to the main pcb in the camera body
[* black] TheWith the camera assembly PH00 screwsface plate removed, use the Spudger Tool to pry the camera face plateassembly away from the camera body
[* black] Once the camera face plateassembly comes loose, pry up on the two plastic tabs on the bottom of the camera face plateassembly that hold the camera face plateassembly to the camera body PCB
[* black] Pull the camera assembly away from the assembly body
[* blue] The camera assembly is held in place by zero insertion force connectors to the main pcb in the camera body

Image 3

No previous image

Added