Skip to main content

Changes to Step #1

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* black] Use a plastic opening tool to gently pry the digitizer connector up from its socket on the logic board. ***BE EXTREMELY CAREFUL AS THE SOCKET CAN BE EASILY DAMAGED OR PINS MAY COME LOOSE RENDERING THE SOCKET USELESS***
+[* black] Use a plastic opening tool to gently pry the digitizer connector up from its socket on the logic board.
+[* icon_caution] Be very careful to pry evenly on the connector, and not on the socket at all. The socket and connector are very delicate and if you damage either, your digitizer won't work.